등록된 상품이 없습니다.
Type: Welding / wire type, M3 screw mounting.
Drive rod: needle shaped button type.
Terminal specifications: with wire, the right side of the lead.
Contact specifications: 1b.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment D4JL-1NFA-D7-01 INSTRUCTION sheet D4JL-1NFA-D7-01
No swing bars are also used for easy long stroke specifications (OT reference value: 1.4mm).
Without harmful substances to the environment, the lead type has also been lead-free. Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Sealed crossroller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector D4JL-1NFA-D7-01 INSTRUCTION sheet.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating).
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models D4JL-1NFA-D7-01 INSTRUCTION sheet. )
Direction of Operation Key insertion: Vertical.
Cable length: 5 m.
3NC (Slow-action).
Slim Safety Door Switches with IP67 Rating.
Slim design with a width of only 17 mm.
(three-contact models).
Reversible design allowing either front or rear mounting.
Built-in Switches with two- or three-terminal contact.
construction are available.
Operation Key with rubber mounting hole to absorb vibration and shock.
IP67 degree of protection. Actuator: One-way roller arm lever (horizontal).
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 1NC/1NO (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
품명 | 상품페이지 참고 |
---|---|
모델명 | 상품페이지 참고 |
법에 의한 인증·허가 등을 받았음을 확인할 수 있는 경우 그에 대한 사항 | 상품페이지 참고 |
제조국 또는 원산지 | 상품페이지 참고 |
제조자 | 상품페이지 참고 |
A/S 책임자와 전화번호 또는 소비자상담 관련 전화번호 | 상품페이지 참고 |
사용후기가 없습니다.
상품문의가 없습니다.
※ 배송지역 : 전국(제주 및 섬지역, 기타 산간/도서지역 포함)
※ 배송기간 : 15시 이전 결제 확인 후 당일 로젠 또는 경동 택배로 발송됩니다.
(단 입고예정 상품과 수입상품 및 주문량이 폭주하는 상품의 경우는 배송이 지연될 수 있습니다.)
※ 배송요금 : 선불/후불 선택
- 교환/반품시 상품 수령일로부터 7일 이내에 전화 요청해 주시기 바랍니다.(상품수령일포함) 041-558-7161
※ 반품/교환/불가사유
- 다음의 경우에는 반품/교환이 불가 합니다.
* 상품 구매시 부주의로 인한 오 주문건의 경우
* 상품 및 구성품을 취급부주의로 인한 파손/고장/오염된 경우
* 고객님의 요청에 의해 주문제작된 경우 고객님의 변심에 의한 경우
* 상품을 설치하였거나 사용 또는 상품 일부를 소비하였을 경우
* 고객님의 책임있는 사유로 상품 등이 멸실 또는 훼손된 경우
* 상품을 개봉 또는 장착 또는 사용하였을 경우
* 중고 상품의 기능상 문제가 없을 경우
* 반품/교환 가능기간을 초과하였을 경우 (상품 수령일 기준 7일 이내)
- 교환/반품시 상품에는 훼손및 변형이 없어야 반품가능합니다. (신품에 한함)
- 교환/반품시 판매자가 이용하는 경동 택배을 이용하셔야만 신속하게 처리됩니다.
- 교환/반품 택배비 미동봉인 경우 [[계좌번호: 신한은행 100-034-266794 예금주: (주)울트라이노베이션]] 로 입금후 게시판 또는 저희
(주)울트라이노베이션 TEL: 041-558-7161~3 로 문의 주시면 확인 후 빠른 처리 하도록 하겠습니다.
- 반드시, 구매자이신 고객님의 이름과 동일한 입금자명으로 입금해 주시기 바랍니다.
충남 아산시 번영로 111 (온천동)
전화 041-558-7161~3 / 팩스 041-557-7161
E-mail plc7161@ultrai.co.kr
운영시간안내
평일 09 : 00 ~ 18 : 00
(토요일, 일요일, 공휴일 휴무)