Technical data | EL2612 |
---|
Connection technology | relay output |
Number of outputs | 2 x change-over |
Nominal voltage | 125 V AC/30 V DC |
Load type | ohmic |
Distributed clocks | – |
Ohmic switching current | 0.5 A AC/2 A DC per channel |
Inductive switching current | no data |
Minimum permitted load | 10 µA at 10 mV DC with intact contact coating |
Lamp test, electronic ballast | – |
Current consumption E-bus | typ. 150 mA |
Electrical isolation | 500 V (E-bus/field potential) |
Current consumption power contacts | – |
Bit width in the process image | 2 outputs |
Operating cycles mech. (min.) | 1 x 108 |
Operating cycles electr. (min.) | 2 x 105 (1 A/30 V DC) |
Configuration | no address or configuration setting |
Special features | signal relay |
Weight | approx. 50 g |
Operating/storage temperature | 0…+55 °C/-25…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 20/variable |
Pluggable wiring | for all ESxxxx terminals |